Santana 20 Rig Plan

The following table shows what rig measurements must be made on a Santana 20 to validate a measurement certificate and comply with the Class Rules:

 

From bottom of mast Tolerance (+ 1/4")
Mast Extrusion Length 26' 8"
Bottom of Top Band 26' 4"
Upper Tang Bolt Max 24' 5 1/2"
Spinnaker Halyard Exit Max 23' 8"
Spreader 11' 9"
Lower Tang Bolt Max 11' 6"
Spinnaker Pole Height Max 5' 5 1/2"
To top of lower band 1' 10"
Between mast bands Tolerance (+ 1/4")
Main Luff 24' 6"
From aft side of mast Tolerance (+ 1/4")
To inside of boom band 7' 0"
From forward side of mast Tolerance (+ 1/4")
To middle of stem forestay hole 8' 2 1/4"
From outer edge to outer edge Tolerance (+ 1/4")
Spinnaker Pole Length Max 8' 2"
From Chainplate Aft Tolerance (+ 1/4")
To Aft Lower Track Max 1' 3"
From Outboard edge of non-skid Tolerance (+ 1/4")
To Aft Lower Track Min 1' 0 1/2"
From Center of Rudderpost Tolerance (+ 1/4")
To Center of Traveller Max 4' 5 1/4"
To Center of Traveller Min 3' 5"
From aft side of mast Tolerance (+ 1/4")
To Mainsheet Bail Max 6' 5 3/4"
To Mainsheet Bail Min 5' 8"
From transom Tolerance (+ 3/8")
To trailing edge of keel 9' 9"