Santana 20 Rig Plan

The following table shows what rig measurements must be made on a Santana 20 to validate a measurement certificate and comply with the Class Rules:

 

From bottom of mast	Tolerance (+ 1/4")
Mast Extrusion Length	26' 8"
Bottom of Top Band	26' 4"
Upper Tang Bolt Max	24' 5 1/2"
Spinnaker Halyard Exit Max	23' 8"
Spreader	11' 9"
Lower Tang Bolt Max	11' 6"
Spinnaker Pole Height Max	5' 5 1/2"
To top of lower band	1' 10"
Between mast bands	Tolerance (+ 1/4")
Main Luff	24' 6"
From aft side of mast	Tolerance (+ 1/4")
To inside of boom band	7' 0"
From forward side of mast	Tolerance (+ 1/4")
To middle of stem forestay hole	8' 2 1/4"
From outer edge to outer edge	Tolerance (+ 1/4")
Spinnaker Pole Length Max	8' 2"
From Chainplate Aft	Tolerance (+ 1/4")
To Aft Lower Track Max	1' 3"
From Outboard edge of non-skid	Tolerance (+ 1/4")
To Aft Lower Track Min	1' 0 1/2"
From Center of Rudderpost	Tolerance (+ 1/4")
To Center of Traveller Max	4' 5 1/4"
To Center of Traveller Min	3' 5"
From aft side of mast	Tolerance (+ 1/4")
To Mainsheet Bail Max	6' 5 3/4"
To Mainsheet Bail Min	5' 8"
From transom	Tolerance (+ 3/8")
To trailing edge of keel	9' 9"

Santana 20 Characteristics